Detector Testers, Equipment & Accessories

2-1/2" FM QST by two 1-1/2" M NPSH | RS SteelThese quality GATED WYE LEADER LINE SIAMESE come with Delrin ball valves built into the body so that either lead can be used independently of the other.2-1/2" female QST (Quebec Standard) swivel inlet and two...

2-1/2" Plastic Breack Cap with J Hooks | RS SteelThe most economical way to protect fire dept. connection inlets is with Plastic Breack Caps. The PBC uses eye bolts and j-hooks to secure the cap via the inlet's pin lugs. The PBC fits 2-1/2" inlets and...

2-1/2" BAT (AMA, BC) Threaded Plug with Chain | RS SteelSKUCouplingHose ThreadODMThreads per InchOther2500BPAMABCBrassBAT38Fits British Columbia (BCT) and Alberta (Alberta Mutual Aid, AMA)2500BPCSABrassCSA3.1255Ontario (Canadian Standards...

2-1/2" x 1-1/2" NPSH M Reducer | RS SteelReduces 2-1/2" Thread to 1-1/2" NPSH (IPT).SKUCouplingHose ThreadODMThreads per InchOther250150AMABCBrassBAT38Fits British Columbia (BCT) and Alberta (Alberta Mutual Aid, AMA)250150QSTBrassQST3.0317Province of...

Smoke Centurion is a new aerosol tester for checking the functionality of smoke detectors. Designed to test the widest possible range of smoke detectors, Smoke Centurion™ offers efficient testing in a simple-to-use format either hand-held or with...

20"H x 20"W Aluminum Hood Filter | RS SteelGALVANIZED GREASE FILTERS offer rugged performance with great corrosion resistance (replace mesh filters that are no longer acceptable, per NFPA 96). Filters come standard with bale handles. UL listed.NOTE:...

21 pin for 1-1/2" x 75 foot hose | RS SteelModel S-4 Series pin racks are used to mount 1 ½" (38mm) folded hose on back wall of fire protection cabinet. Typically used in conjunction with Model S-5 Water-Stop. Pins swivel 180°. Designed for rack and...

24 pin for 1-1/2" x 100 foot hose | RS SteelModel S4 Series pin racks are used to mount 1 ½" (38mm) folded hose on back wall of fire protection cabinet. Typically used in conjunction with Model S-5 Water-Stop. Pins swivel 180°. Designed for rack and...

24" Hose Reel | RS SteelHeavy Duty Hose Reels shipped assembled. Red baked enamel finish. Comes with a 14 gauge steel wall bracket that swings 180°.This reel accommodates the following 1-1/2" Diameter hose:150 feet of Rack Hose100 feet of Single Jacket...

25" High Capacity Hose Reel | RS SteelRuggged High Capacity Heavy Duty hose Reels have sides and hub constructed of 16-gauge steel. Welded steel 1" x 3?16" reel bracket, with a 1 1?2" x 1?4" wall bracket, provides superior support. Wall bracket swings...

Smoke Sabre is a functional aerosol smoke check for testing smoke detectors quickly and cost effectively at a flick-of-the-wrist. Low cost, simple, and fun to use, it is a revolutionary tester that eliminates the risk of harmful residue - the big problem...

30" Grip & Trigger (use with N59) | RS Steel

360 Degree F Model A with 2 "S" Hook - Range Guard | RS Steel Certifications This product is a shorter high-load variation that is used in range hood applications and is listed by Underwriters Laboratories, Inc.360 D F Temperature RatingFor Range Guard...

SOLO ACCESS POLES are made of fiberglass and are designed for use in servicing fire detectors and can be combined to service heights up to 30+ feet.The SOLO101 is a 3.9 ft extension Pole 3.9ft - Up to 3 can be used to extend the SOLO100 to access...

SOLOA10 Smoke Detector Tester is designed to be used handheld or in an aerosol dispenser like the SOLO330. This tester is non-flammable, non-toxic, silicone free, and leaves no harmful residue on the tested smoke detectors. Conforms to new global aerosol...

Type a description for this product here...

5ft Section E-Track | RS SteelCylinder Rack System can be used to meet DOT 49CFR, section 177.840 requirement for transporting compressed gas cylinders. Series E horizontal track (SKU# ETK) is finished with a gray primer, ready to install. The 2"...

6 lb Pick Head Fire Axe | RS SteelPICK HEAD FIRE AXE with a 6 lb. head. Precision balanced for safe handling. Optional mounting bracket and hook available separately.

6" Long Nose Vise-Grips® with Wire Cutter | RS SteelVISE-GRIP® LOCKING PLIERS can be used for turning, cutting, tightening, clamping and twisting. Features hardened tooth design to grip from any angle, adjusting screw for exacting pressure and hold for...

6" Slip Joint Pliers | RS SteelPLIERS features perfectly mated cutters, heat treated to hold their edge and polished high carbon drop forged steel construction. CHANNELLOCK® slip joint pliers feature a wire cutting shear and PERMALOCK® fastener to...